Job details
- Service
- Rekey
- Area
- South End, Charlotte
- Technician
- Ori
- Completed
- September 2026
- Rekeying changes the key that opens a lock while keeping the existing commercial hardware on the door.
- Falcon storefront paddle handles and commercial levers can both be rekeyed by removing the cylinder and changing the pins.
- Keep a key log and rekey whenever a key holder leaves or keys go missing.
- Check with your landlord or local fire marshal before changing hardware on any exit door.
In September 2026, a customer booked a business rekey for her location in South End, Charlotte, and our technician Ori handled the job. The work covered Falcon key cylinders on a storefront paddle handle and on an interior lever handle. Rekeying changes which key opens a lock without replacing the lock itself, so the existing hardware stays on the door and old keys stop working.
Below is what the job involved, how commercial rekeying works, and what other business owners can learn from it.
A Business Rekey Request in South End
The dispatch note was short: “business rekey.” That is a common request from shops and offices. Owners usually want control over who can get in, and the old keys need to stop working.
Our job photos show two doors:
- The storefront entrance. A dark aluminum storefront door frame with a black paddle handle and a Falcon key cylinder, next to glass covered with perforated film.
- An interior door. A white door with a brushed steel Falcon lever handle and a keyed cylinder.
Both were good candidates for rekeying. The hardware was in place and working, so the goal was to change the keys, not the locks.
How Ori Rekeyed the Falcon Cylinders
A commercial rekey follows the same basic order every time. Here is how the work is done:
- Remove the cylinder from the hardware. On storefront paddle handles and commercial levers, the cylinder comes out of the handle or lock body so it can be worked on at the bench or the tailgate.
- Pull the plug. The plug is the part of the cylinder that turns when you insert a key. Our photos show the brass plug removed from its housing, with the back of the plug visible.
- Replace the pins. Inside the plug are small pins of different lengths. Each pin lines up with a cut on the key. To rekey, the technician removes the old pins and installs new ones that match a new key.
- Cut and test the new key. The new key is cut to match the new pin setup. Our photos show a key blank and a cut key alongside the cylinders during the work.
- Reassemble and reinstall. The plug goes back in the housing, the cylinder goes back in the handle, and every new key is tried in every lock it should open.
Once a cylinder is reinstalled, the old keys no longer turn it. That is the whole point: anyone holding an old key loses access.
You can read more about how the process works on our rekey service page.
What Matters About Commercial Hardware Like This
Paddle handles on storefront doors
A paddle handle is common on aluminum storefront doors. You push or pull the paddle to release the latch. The key cylinder sits in the handle and locks or unlocks it. These cylinders can be rekeyed just like a standard lock, which saves the cost and downtime of replacing the handle.
Commercial lever handles
The interior door had a brushed steel lever with a keyed cylinder. Commercial levers are built for heavy daily use, and the cylinder can be rekeyed without taking the whole lever set off the door in many cases.
The keyway
One of our photos shows the face of a Falcon cylinder with its keyway visible. The keyway is the shaped slot the key slides into. Locks that share a keyway can often be keyed alike, so one key opens several doors. That matters when you want fewer keys on the ring, or when you plan to build a master key system later.
Why rekey instead of replace
If the hardware works well and fits the door, rekeying is usually the faster choice. The door stays in service, the finish and style stay the same, and the business does not wait on new parts. Replacement makes more sense when a lock is worn out, damaged, or no longer the right type for the door.
Key Control Tips for Business Owners
Rekeying only helps if you keep track of the new keys. Here is what we suggest for any shop or office.
Keep a key log
Write down who has which key, for which door, and when they got it. When someone leaves, you will know exactly which keys to collect.
Limit who holds the front door key
The storefront key is the most important one. Give it only to people who open or close the business. Staff who only need an interior room can get a key for that room alone.
Rekey when access changes
Good times to rekey include:
- After you take over a new space
- After a manager or key holder leaves — see our page on rekeying after an employee leaves
- After keys are lost or not returned
- After a break-in or attempted break-in
Think about levels of access
If different people need different doors, a master key system lets one key open everything while other keys open only certain doors. If you want to stop handing out physical keys altogether, access control uses credentials you can turn on and off.
Don’t block your exits
Storefront and exit doors have to let people out. Before you add a lock, a second deadbolt, or a different handle to an exit door, check with your landlord, building manager, or the local fire marshal about the rules for your space. Rekeying does not change how a door operates, which is one reason it is a simple fix for exit doors.
Plan the work around business hours
A rekey keeps each door in place, and a door is only out of service while its cylinder is being worked on. Many owners schedule the job before opening or at a slow time of day.
Need a Business Rekey in South End, Charlotte?
We are a licensed, bonded and insured mobile locksmith (NC License #2721), and we come to your business with the tools to rekey on site. You can see more of our jobs in South End, Charlotte or learn about our commercial locksmith work. If you are in South End or nearby and want your business locks rekeyed, call us at 704-905-6600 or request service online.
We come to you — home, business or car.