Job details
- Service
- Commercial lock work
- Area
- University area, Charlotte
- Technician
- John
- Completed
- October 2026
- John installed an Adams Rite 8400 series panic bar on the customer's aluminum storefront door in the University area, Charlotte.
- Narrow-stile panic bars work with a deadlatch so the outside stays locked while the inside always opens with one push.
- Check exit door requirements with your building inspector or fire marshal before choosing hardware.
- Track who holds keys and lockbox codes, and rekey when staff or contractors leave.
In October 2026, our technician John installed a panic bar on an aluminum storefront door for a customer in the University area, Charlotte. The job came in as a lock installation, and John closed it out as commercial lock work: a panic bar. The hardware is an Adams Rite 8400 series exit device. It works with the narrow-stile deadlatch that aluminum glass doors use.
Here is what the job involved and what the hardware does. We also cover what other business owners should think about before adding exit hardware to their own storefront.
The Customer’s Storefront Door Before the Panic Bar
The entrance is a pair of aluminum-framed glass storefront doors. Our job photos show what was already in place:
- Pull handles on the outside of the doors
- A keyed cylinder on the outside for locking and unlocking
- An Adams Rite deadlatch faceplate on the edge of the aluminum door
- Lever handles on the door
- Master Lock lockboxes hanging from the handles
This is a very common setup on storefronts around Charlotte. Aluminum doors have a narrow frame, called a stile, so they need locks made to fit that thin space. A regular residential lock won’t fit.
The job was booked to install a panic bar on this door. A panic bar is a horizontal push bar across the inside of the door. Anyone leaving can push it to open the door without a key or a twist.
How John Installed the Panic Bar
The job photos show the finished Adams Rite 8400 series panic bar on the door, with our work van and tool bag nearby. They also show a new Adams Rite 4900 series deadlatch lock body, still in its open box. A panic bar of this type works together with a deadlatch inside the door, so the two parts go in as a pair.
This is how we do a storefront panic bar install on an aluminum door:
- Check the door and frame. We confirm the stile width, the backset of the existing lock and the condition of the hinges or pivots. A door that sags or drags will make any exit device work poorly.
- Remove the old interior hardware. On a door like this, that can mean taking off the inside lever or paddle that drove the old latch.
- Install the deadlatch body. The lock body slides into the pocket in the door’s edge and is held by the faceplate. The latch bolt has to line up with the strike in the frame.
- Mount the panic bar. The bar is positioned on the inside face of the door and fastened so its mechanism engages the deadlatch.
- Keep the outside keyed cylinder working. The outside cylinder still locks and unlocks from the street side. The inside push bar always lets people out.
- Test it. We push the bar many times, and we let the door close on its own to confirm it latches every time. We also test the key from outside.
The point of doing it this way is that the business can stay open while the work happens. The rest of the storefront stays in use, and the door is back in service once testing is done.
Why Panic Bars and Narrow-Stile Deadlatches Matter for Storefronts
A deadlatch is not the same as a basic spring latch. It has a small extra plunger beside the main latch. When the door is closed, that plunger is pressed in and holds the latch so it can’t be pushed back with a card or thin tool from outside. For a glass storefront, that’s a real step up from a plain latch.
The panic bar adds the other half of the job: getting people out fast. Key points:
- One motion to exit. A push on the bar retracts the latch. Nobody has to find a key, a thumbturn or a lever in a hurry.
- Locked from the outside, free from the inside. The outside stays secured by the keyed cylinder, but the inside never traps anyone.
- Built for heavy use. Storefront doors open and close all day. Hardware made for aluminum commercial doors holds up better than lighter parts.
- Fits the existing door. Narrow-stile exit devices are made to mount on aluminum doors without replacing the whole door.
Rules about which doors need panic hardware depend on the building, how many people use it and how it’s classified. We don’t give legal advice on this. Check with your landlord, your building inspector or the local fire marshal before you choose hardware for an exit door.
Tips for Business Owners Adding Exit Hardware
If you run a shop, office or restaurant with glass storefront doors, these tips will help.
Don’t lock an exit so it needs a key from inside
A double-cylinder lock that needs a key on both sides can trap people. If staff lock up from inside with a key, ask a locksmith about exit hardware that keeps the outside secure and the inside free. Then confirm the plan with your code official.
Know who holds every key
Our photos show lockboxes on the customer’s door handles. Lockboxes are often used to hold keys for people who need access. Whatever method you use, keep a simple list of who has a key or a lockbox code. Change the code when someone no longer needs it.
Rekey when people leave
If an employee, manager or contractor leaves with a key, the safest move is to rekey the cylinder. Read more about rekeying after an employee leaves.
Think about a master key system or access control
Businesses with several doors often do better with a master key system. Each person carries only the key they need, and a manager key opens everything. If you want to track who comes and goes, access control is another option.
Fix a sagging door first
If your storefront door drags, slams or doesn’t latch on its own, deal with that before or during the hardware install. A new panic bar on a door that doesn’t close right won’t secure anything.
Use a locksmith who works on aluminum doors
Narrow-stile hardware has tight tolerances. Our commercial locksmith team works on storefront locks, panic bars and door closers every week. See more on our lock installation service.
Need Storefront Work in the University Area?
If your business in the University area, Charlotte or nearby needs a panic bar, a new deadlatch, a rekey or a lock change, call Public Locksmith at 704-905-6600 or request service online. We’re licensed (NC Locksmith License #2721), bonded and insured, and fully mobile, so we come to your door. You can also see more of our jobs in the University area.
We come to you — home, business or car.